The SAM130 for 12 or 24V DC systems.

The SAM130 is a four digit panel mounting process indicator / digital panel meter with LCD display which may be programmed to display process information from signals of 0-10 Volts or 4-20 mA. a series of 12 parameters are programmable by the front panel push buttons or from a separate detachable keypad. Optional dual alarm relays or an analogue output are also available.

Programmable features include display scaling, hold time and update time and decimal point may be selected. Auto scaling features are included for use where the display required for an incoming analogue input is known.

Operation from 0-10V or 4-20 mA is program selectable.

When the relay or analogue output options are included the relay set points and analogue full scale output are set in the parameter program.

An output pulse with a frequency proportional to the 0-10V input is available as standard.

The instrument may be used to measure standard 0-10V or 4-20mA process signals and display in units which refer to the variable being monitored. E.g. pressure, temperature, height, position, speed, time, voltage, current, etc.

The optional relays are suitable for alarm or control purposes and the optional 0-10V or 4-20 ma outputs are available for recording data logging ore control purposes.

£135