| SAM130 : Programmable Process Indicator / Digital Panel Meter |
| |
The SAM130 for 12 or 24V DC systems.
The SAM130 is a four digit panel mounting process indicator / digital panel meter with LCD display which may be programmed to display process information from signals of 0-10 Volts or 4-20 mA. a series of 12 parameters are programmable by the front panel push buttons or from a separate detachable keypad. Optional dual alarm relays or an analogue output are also available.
Programmable features include display scaling, hold time and update time and decimal point may be selected. Auto scaling features are included for use where the display required for an incoming analogue input is known.
Operation from 0-10V or 4-20 mA is program selectable.
When the relay or analogue output options are included the relay set points and analogue full scale output are set in the parameter program.
An output pulse with a frequency proportional to the 0-10V input is available as standard.
The instrument may be used to measure standard 0-10V or 4-20mA process signals and display in units which refer to the variable being monitored. E.g. pressure, temperature, height, position, speed, time, voltage, current, etc.
The optional relays are suitable for alarm or control purposes and the optional 0-10V or 4-20 ma outputs are available for recording data logging ore control purposes.
View Full Details
|
| |
| DVM-P : Panel Meter |
| |
A simple panel meter with dual potentiometer pre-sets.
The DVM-P is a panel meter specifically engineered to provide a digital display from potentiometers or DC voltage and current inputs. The LED display can be configured to read out in a variety of engineering units.
An internal power supply is available to energise external potentiometers and calibration pre-sets are mounted on the rear panel.
View Full Details
|
| |
| CLT230A : Programmable Flow and Volume Indicator |
| |
The CLT230A system provides a dual LCD display of flow and volume with an output for a total volume counter.
An integral relay trip operates at a pre-set flow and a variable 0/10Vdc output signal is available for control or monitoring purposes.
The instrument operates on 24V DC or 115/230V AC with a bolt on power supply.
The system is normally provided pre-programmed but this can be changed with the front panel; keypad. Sensing is from a 0-10V DC signal.
Applications: Flow monitoring, energy sensing & control, Rate monitoring from PLC output.
View Full Details
|
| |
| PDM125 : Programmable Panel Meter |
| |
The PDM125 was introduced as an instrument suitable for displaying speed or other parameters from 0-10 volts or 4-20mA signals.
It uses the same software as the DFM125 & is programmed in a similar manner.
The auto calibration feature permits the direct input of the required digital reading without the need for sometimes complicated calculations.
See the product manual for further information.
View Full Details
|
| |
