The CLT230D system provides a dual LCD display of speed and distance with an optional input for a totalising counter.

An integral relay trip operates at a pre-set speed and a variable 0-10V DC output signal can be provided for control or monitoring purposes. The instrument is designed for use on 12 or 24V DC supplies as specified.

The system is normally provided pre-programmed but may be altered on site using the MKP125 plug in programmer.

Sensing is carried out by a pulse sensor in conjunction with a bolt head, keyway or gear teeth. The sensor normally used is a 3 wire inductive proximity sensor.

The program is set to permit the CLT230D to display the required speed and count readings and should be adjusted for the number of pulses per revolution at the sensing pint and any gearbox ratio involved.

Features of the CLT230D Include:

• Dual 4 digit, 12.5 mm LCD Display of Speed & Count
• Variable display update time
• External totaliser drive signal for total count
• Speed alarm relay for under/over speed - selectable for normally ON or OFF
• External reset facility for LCD batch count
• Sensing or rate & count signal from a single sensor
• Analogue output 0-10V DC of rate signal
• Counter Pre Divide facilities for batch & total
• Digital scaling of analogue signal
• Programmable parameters for speed scaling, counting and alarm
• Plug in programming facility

£156