The CLT230A system provides a dual LCD display of flow and volume with an output for a total volume counter.

An integral relay trip operates at a pre-set flow and a variable 0/10Vdc output signal is available for control or monitoring purposes.

The instrument operates on 24V DC or 115/230V AC with a bolt on power supply.

The system is normally provided pre-programmed but this can be changed with the front panel; keypad. Sensing is from a 0-10V DC signal.

Applications: Flow monitoring, energy sensing & control, Rate monitoring from PLC output.

Features of the CLT230A Include:

• Dual 4 digit 12.5mm LCD display of Flow & Volume
• Variable display update
• External totaliser drive signal for volume
• Flow alarm relay for over/under rate
• External reset facility for LCD volume display
• Sensing of Flow & volume from a single sensor
• Analogue output 0-10V DC from flow signal
• Volume counter pre-divide signal
• Digital scaling of analogue signal
• Programmable parameters for Flow, - Volume alarm
• Front panel programming

£175