| SAM130 Programmable Process Indicator / Digital Panel
Meter |
 The
SAM130 for 12 or 24V DC systems.
The
SAM130 is a four digit panel mounting process indicator /
digital panel meter with LCD display which may be programmed
to display process information from signals of 0-10 Volts
or 4-20 mA. a series of 12 parameters are programmable by
the front panel push buttons or from a separate detachable
keypad. Optional dual alarm relays or an analogue output are
also available.
Programmable
features include display scaling, hold time and update time
and decimal point may be selected. Auto scaling features are
included for use where the display required for an incoming
analogue input is known.
Operation
from 0-10V or 4-20 mA is program selectable.
When
the relay or analogue output options are included the relay
set points and analogue full scale output are set in the parameter
program.
An
output pulse with a frequency proportional to the 0-10V input
is available as standard.
The
instrument may be used to measure standard 0-10V or 4-20mA
process signals and display in units which refer to the variable
being monitored. E.g. pressure, temperature, height, position,
speed, time, voltage, current, etc.
The
optional relays are suitable for alarm or control purposes
and the optional 0-10V or 4-20 ma outputs are available for
recording data logging ore control purposes.
| Specifications: |
| SUPPLY: |
12
or 24V DC (11-15 or 19-30)V DC min. & max. |
| AUXILIARY
OUTPUTS: |
9V
DC or 15V DC @ 30 ma (12 or 24V models) |
| ACCURACY: |
Determined
by program, ±1 digit, normally better than 0.1% |
| RANGE: |
0-9999 |
| DISPLAY: |
12.5
mm LCD |
| INPUTS: |
0-10V
DC or 0-20 ma DC or 4-20 ma, Potentiometer Options
(and most sub multiples of these down to 1V & 1mA) |
| OUTPUT
FREQUENCY: |
1
kHz for 10V input when SF1 = 12500 (0.5V pulse) |
| UPDATE
TIME: |
Variable
150 mSec - 2 seconds |
| ZERO
OFFSET: |
1
digit per 1000 units of scale |
| ZERO
OFFSET ADJUSTMENT: |
0-9999
digits |
| DIMENSIONS: |
96
mm x 48 mm x 135 mm |
| PANEL
CUT OUT: |
91
mm x 43 mm |
| WEIGHT: |
0.5
Kg |
| OUTPUT
OPTIONS: |
0-10V
DC (Max. load 10mA), 4-20mA DC (Max. load = 500R), Relays
(two rated at 0.1A @ 24V AC) |
Top
- Back
 A
simple panel meter with dual potentiometer pre-sets.
The
DVM-P is a panel meter specifically engineered to provide
a digital display from potentiometers or DC voltage and current
inputs. The LED display can be configured to read out in a
variety of engineering units.
An internal power supply is available to energise external
potentiometers and calibration pre-sets are mounted on the
rear panel.
Features
Include:
- Adjustable
display scaling
- 3.5
digit high brightness display
- Industry
standard DIN 96 x 48 mm case
- Internal
signal conditioning
- 115
or 230 V AC power supply
Top
- Back
| CLT230A Programmable Flow & Volume Indicator |
 The
CLT230A system provides a dual LCD display of flow and volume
with an output for a total volume counter.
An
integral relay trip operates at a pre-set flow and a variable
0/10Vdc output signal is available for control or monitoring
purposes.
The instrument operates on 24V DC or 115/230V AC with a bolt
on power supply.
The
system is normally provided pre-programmed but this can be
changed with the front panel; keypad. Sensing is from a 0-10V
DC signal.
Applications:
Flow monitoring, energy sensing & control, Rate monitoring
from PLC output.
Features
Include:
- Dual
4 digit 12.5mm LCD display of Flow & Volume
- Variable
display update
- External
totaliser drive signal for volume
- Flow
alarm relay for over/under rate
- External
reset facility for LCD volume display
- Sensing
of Flow & volume from a single sensor
- Analogue
output 0-10V DC from flow signal
- Volume
counter pre-divide signal
- Digital
scaling of analogue signal
- Programmable
parameters for Flow, - Volume alarm
- Front
panel programming
| Specifications: |
| SUPPLY: |
12/24V
Dc or 230V AC |
| TEMP
RANGE: |
0-50°C |
| ENCLOSURE: |
96
x 96 x 70 mm deep |
| PANEL
CUT OUT: |
91
x 91 mm |
| WEIGHT: |
0.5
kg |
| MAX
VOLUME COUNT: |
9999 |
| MAX
FLOW RATE: |
9999 |
| DISPLAY: |
Dual
4 digit 12.5 mm LCDs |
| ACCURACY: |
±1
digit |
| DC
OUTPUT: |
0-10V
Dc |
| AUXILIARY
SUPPLY: |
15V
DC |
Top
- Back
| PDM125 Programmable Panel Meter |
 Digitally
programmable panel meter with optional features.
The
PDM125 is a digital panel meter with user definable features.
Measurement of DC voltage and current is carried out by converting
the signal to frequency and scaling the result to suit the
application. Two optional alarm relays or analogue outputs
(0-10v or 4-20 mA) are available.
Programming
is carried out by the three front panel buttons or an optional
plug in keypad.
Features
include:
- Scalable
display in units to suit your application.
- Bright
4 digit LED display
- Adjustable
readout precision
- Variable
update time
- Display
averaging function
- Integral
transducer supply for potentiometers, etc.
- 115
or 230 v AC power supply
- Individual
LED's for alarm level, signal output and x10 readings.
- Non
Volatile memory
- Industry
standard DIN 96 x 48 enclosure
| Specifications: |
| SUPPLY: |
115
or 230 Volt AC, 24 Volt AC option. |
| DIMENSIONS: |
96
x 48 x 135 mm |
| PANEL
CUT OUT: |
91
x 43 mm |
| VOLTAGE
RANGE: |
0-100
V DC |
| CURRENT
RANGE: |
0-100
ma DC |
| ACCURACY: |
Normally
better than 0.1% programme dependent |
| TRANSDUCER
SUPPLY: |
12
Volt DC @ 30 ma |
| DISPLAY: |
14
mm 4 digit LED |
| UPDATE
TIME: |
Variable
150 m/sec -2 seconds |
| OPTIONS: |
0-10V,
4-20mA or 2 alarm relays |
Top
- Back
|
