| CDIS150 Intelligent Process Monitors |
 The
CDIS150 is packaged in a DIN 144 mm x 72 mm panel mounting
enclosure. It houses a bright 4 digit 25.4 mm ( 1 inch) display
and is programmable with a three button keypad. An external
plug-in keypad system may also be used.
The
auto calibration system is included as standard.
It is available for analogue or digital signal inputs.
Dual
alarm relays and analogue retransmission of 0-10 Volts or
4-20 mA can be provided as options.
Applications:
Direct readout of Process Variables when used with the appropriate
transducer. These include; resistance, temperature, force,
flow, level, energy, speed, rate, time and count.
Features
include:
- Large
25.4 mm LED display
- Suitable
for Analogue or digital Signals
- digital
input systems for single or Dual channels
- Heavy
duty relays for alarm purposes
- Display
visible from up to 10 metres
- Simple
programming system
- Auto
calibration eliminates complex calculations
| Specifications: |
| SUPPLY: |
115
or 230V AC |
| ENCLOSURE: |
144
x 72 x 155 mm deep |
| PANEL
CUT OUT: |
137
x 67 mm |
| TEMP.
RANGE: |
0-50
°C |
| DISPLAY: |
4
digit 25.4 mm LED |
| PRE-SET
CALCULATIONS: |
5
- in control options |
| SENSORS: |
Analogue
Transducers or Proximity Sensors |
| VOLTAGE
INPUT: |
0-10V |
| CURRENT
INPUT: |
0-20
ma or 4-20 ma |
| FREQUENCY
INPUT: |
0.01
Hz - 10 kHz (0.01-120,000 rpm) |
| ACCURACY: |
Better
than 0.1%, program dependent |
| TRANSDUCER
SUPPLY: |
12V
DC @ 30 ma |
| OPTIONS: |
0-10V
or 4-20 ma output or 2 relays |
| UPDATE
TIME: |
Variable
150 mSec - 2 Sec |
| WEIGHT: |
1.5Kg |
Top
- Back
| CDIS325 Intelligent Process Monitor |
 The
surface mounting CDIS325 houses a large, bright 57 mm 4 digit
LED display system. The enclosure dimensions are 235 mm x
160 mm x 100 mm deep.
Programming
is via an integral 3 button keypad, accessible behind the
IP65 front panel. The self contained programming keypad enables
the instrument to be quickly configured to your requirements.
Models are available for analogue or digital inputs. Dual
alarm relays or retransmitted analogue outputs are available
as options.
Standard
software packages can be provided for a variety of applications,
including a 24 hour clock.
Applications:
Direct readout of process variables when used with the appropriate
transducer. These include; resistance, temperature, force,
flow, level, energy, speed, rate, time and count.
Features
include:
- Large
bright 57 mm LED display, visible up to 25 metres
- Auto
calibration
- Simple
on-site programming
- Integral
3 button keypad
- Choice
of display performance
- Comprehensive
programming software
- Suitable
for difficult environments
- IP65
enclosure
| Specifications: |
| SUPPLY: |
115
or 230 V AC or 24V AC |
| DIMENSIONS: |
Surface
mounting enclosure: 235 x 160 x 100 mm deep (panel mounting
option) |
| TEMP.
RANGE: |
0-50
°C |
| INPUT
SIGNALS: |
0-10V
DC, 4-20mA DC, 0-10 kHz |
| FIXING
CENTRES: |
140.5
mm x 216 mm |
| PRE-SET
SELECTIONS: |
5
- in control options |
| ACCURACY: |
Better
than 0.1% program dependent |
| TRANSDUCER
SUPPLY: |
12V
DC @ 30 ma |
| DISPLAY: |
57
mm 4 digit bright LED display |
| WEIGHT: |
2Kg |
| OPTIONS: |
0-10V
or 4-20 ma retransmitted outputs. Dual alarm/control relays. |
Top
- Back |
