Data Sheet |
<< BACK TO OVERVIEW |
| Part No.: |
FLC10 |
| Product: |
Marine Tachometer and Speed Switch |
| Product Range: |
Marine Tachometers |
|
|
|
|
Specifications |
| SUPPLY: |
24V DC 110V or 240V AC option |
| DIMENSIONS: |
Backplate: 205 x 130 mm |
| |
Enclosure: 235 x 160 x 100 mm deep |
| SENSOR: |
Magnetic sensor or AC tachogenerator option |
| METER DRIVE: |
01-0V DC with max. load of 20 ma |
| TEMP. RANGE: |
0-60 °C |
| FUSED AT: |
2 amps |
| RELAYS: |
3 SPCO, 1 DPCO, rate/lamp at 240 V AC resistive |
|
|
Features
- Heavy duty meter drive - 10 Volts with 20 mA load capacity
- Basic 24 Volt fused supply for mobile applications
- Optional mains supply bolt on module
- Four speed trips with individual relay outputs
- Magnetic sensor input amplifier
- Range switching onboard for on site calibration where necessary
- Polycarbonate IP65 enclosure
|
|
Marine Tachometer with four level speed switch.
The FLC speed switch and tachometer is designed to provide speed readout and control facilities for industrial and marine applications.
A toothed wheel is mounted on the rotating shaft to be monitored and a magnetic or inductive probe is used to generates a pulse signal with a frequency proportional to shaft speed.
Several indicators may be driven by the voltage output produced, with a total current requirements of 20 mA. Four speed level trips are incorporated in the system, which may be set to any point within the speed range. |
|
|
 |
