Control Ability

The 24 stage CWT20 sequence controller is designed as a self contained unit, providing an internal cycle counter and a heavy duty power supply for external use. 

Choose 24V d.c LED tachometers where a bright LED display is required on mobile equipment. The 24 Volt d.c version of the DFM125 was originally introduced as an LED tachometer for vehicles. 

 

SFM130 - Four Digit LCD Panel Mounting Tachometer with Alarm Operation The SFM130 programmable speedometer / tachometer is suitable for use on vehicle or on applications where 12 or 24 Volt d.c. is available. 

The CSN125D 0/10V is a DIN rail pulse sensing tachometer which provides a 0/10Volts d.c output for use with seperate panel mounting meters. It is available for standard 115Va.c or 230Va.c supplies. 

SFM130 - Four Digit LCD Panel Mounting Tachometer with Alarm Operation The SFM130 programmable speedometer / tachometer is suitable for use on vehicle or on applications where 12 or 24 Volt d.c. is available. 

The MPO1T is a magnetic reluctance Sensor which is housed in a 5/8 threaded tube with two locknuts. The connections to the sensor are made via standard 0.25 inch automotive type tags. 

The MPO1 5/8 2M is a magnetic reluctance Sensor which is housed in a 5/8 threaded tube with two locknuts. It is fitted with a 2 metre lead. 

The MPO1-1/4BSP S is a 45mm long magnetic reluctance sensor which is housed in a 1/4 BSP threaded brass tube & complete with two locknuts. It is fitted with a 2 metre screened lead. 

The MPO1-1/4BSP L is a 75mm long magnetic reluctance sensor which is housed in a 1/4 BSP threaded brass tube & complete with two locknuts. It is fitted with a 2 metre screened lead. 

The IN1.5 8GN is used with our standard range of tachometers & systems. The 1.5mm sensing range is usefulwhere gear wheels or targets with small pitches are to be sensed. The shielded sensing end contains the sensing field (1.5mm) within the diameter. 

 

The IN4 12GN sensor is widely used with our standard range of tachometers & systems. The 4mm sensing range is ideal for use with larger gear teeth & well spaced boltheads (15mm pitch) 

The IN4 12GN DIN plug is identical to the standard IN4 12GN & may be used where matching DIN sockets are available. 

The IN4 12GN sensor with a screw end allows different lengths of cables to be attached. We can supply 2m,5m & 10m cables to suit. 

The IN8 12GN sensors are similar to the IN4 12GN but has an extended 8mm sensing distance. 

The ISH12E proximity sensor is a two wire NAMUR sensor which can be used with most Control Ability tachometers. The ISH12E can also be used with Intrinsically safe amplifier if required. 

The ISH12E DIN plug is identical to the standard ISH12E & may be used where matching DIN sockets are available. 

The OPS18R is a retroreflective optical sensor which may be used in conjunction with suitable reflective tape to sense the speed of a motor. 

The OPS18R Optical sensor with a screw end allows different lengths of cables to be attached. We can supply 2m,5m & 10m cables to suit.