Control Ability

The SAM130 is a four digit LCD display which is suitable for showing speed or any other parameter which can be represented by 0/10 volts or 4/20mA. 

The TOM4 rotation monitor provides digital readouts of speed and revolution count. It is suitable for use in a variety of vehicle based applications. When used in a truckmixer the TOM4 can sense from the drum or gearbox or symmetrically spaced bolt head 

The CDIS150 is packed in a surface mount enclosure with transparent water resistant cover. The large (1inch) display is programmable with a built-in, three button keypad. The auto calibration system is included as standard 

The CLT230A system provides a dual LCD display of flow and volume with an output for a total volume counter. An integral relay trip operates at a pre-set flow and a variable 0/10Vdc output signal is available for control or monitoring purposes. 

The CSN125PT 0/10V is a DIN rail pulse sensing tachometer which provides a 0/10Volts d.c output for use with seperate panel mounting meters. It is available for standard 115Va.c or 230Va.c supplies. 

The Controset T4 system is designed to provide precise digital speed selection of diesel engined systems using 24Vd.c servo motors. It is suitable for new installations or for retrofit applications. 

The 3 button LCD-DIS Programmer is designed to plug into the rear of 125, 130 and TOM series products. It enables users to carry out on-site program modifications of up to 12 Parameters. 

The MSS Servo Process Controllers are suitable for use in a wide range of industrial applications. They operate by comparing the demand signal set on the control panel with the value of a reply or feedback signal. 

The PFM120ES2 includes Hand Held Tachometer with sensor socket, OPS18R Optical plug in Sensor, Battery & Reflective Tape. 

The SS1 Monitor is a plug in module which functions by detecting the speed of a moving bolt head, toothed wheel or other suitable component. 

The TOM5 system consists of a cab mounting digital instrument and a contactless proximity sensor. The four digit LCD display indicates speed in R.P.M or number of revolutions completed. 

The BRA7 is the plug in component of the MSS8 controller that carries out the measurement of the two monitored voltage signals. 

The Controdis 325 intelligent process monitor provides a large four digit display of process information. Models are available for input signals of 0-10V, 4-20mA and frequency (0-10 Khz). 

 

This replaces the CTS25,CTS30 & CTS140 The CSN130RT system consists of a speed sensor and a frequency to voltage or current converter. 

The DFM125 tachometer/speedometer display is the most popular instrument in the industrial range. Having a front panel keypad, the program can be readily changed by the customer to meet most requirements. 

This Package comes with the hand held tachometer,IN4 12GN Inductive sensor,OPS18R Optical sensor,reflective tape, battery & a carry case. 

The TOM 6 system consists of a cab mounting digital instrument and a contactless proximity sensor. The four digit LED display indicates speed in R.P.M. or rate. 

The CLT230D system provides a dual LCD display of speed and distance with an optional input for a totalising counter. 

This replaces the CTS25,CTS30 & CTS140. The CSN130PT system consists of a speed sensor and a frequency to voltage or current converter.