Control Ability

The CDIS150 is packed in a surface mount enclosure with transparent water resistant cover. The large (1inch) display is programmable with a built-in, three button keypad. The auto calibration system is included as standard. 

The CSN125-2RL speed switch dual relay trip is a DIN rail fequency to voltage converter which is fitted with two alarm or control relays. The relays can be programmed to operate in several differant modes. The unit is available for standard 115Va.c or 230 

A speed control and display system for mechanical and hydraulic variable speed drives. The CST125 controller provides precise digital speed selection using hydraulic or mechanical variators and standard AC servo meters. 

Digital LED Tachometer, speedometer display is the most popular instrument in the industrial range. Having a front panel keypad, the program can be readily changed by the customer to meet most requirements. 

Analogue speed indication with reversing interlock facility. The FV25A Marine Tachometer is a heavy duty speed indication and monitoring system which is suitable for use with reversible machinery. 

The PDM125 Programmable Panel Meter/Tachometer With Auto Calibration. Choose this tachometer if the speed signal is in the form of a d.c voltage or current. 

The PDM125 has a 4 digit bright LED display. It is suitable for displaying speed & may other variables which are available as 0-10 Volts or 4-20mA etc. 

The PFM 120 Microprocessor based handheld tachometer is a versatile instrument offering a very complete specification. A single push-button enables speed measurement to be carried out from 1 rpm to 100,000 rpm. 

SFM130 - Four Digit LCD Panel Mounting Tachometer with Alarm Operation The SFM130 programmable speedometer / tachometer is suitable for use on vehicle or on applications where 12 or 24 Volt d.c. is available. 

SFM130MR meter relays are four digit programmable panel meters which are fitted with control relays or analog output signals. 

The combined Odometer/Analog Tachometer system provides speed and revolution count information from a rotating shaft. 

The Controdis 325 intelligent process monitor provides a large four digit display of process information. Models are available for input signals of 0-10V, 4-20mA and frequency (0-10 Khz). 

The CSN125RT 4/20mA is a DIN rail, pulse sensing, frequency to voltage converter which can provide a 4/20mA d.c signal. It is suitable for use with data loggers, programmable logic countrollers & variable speed drives. It is available for standard 115Va.c 

The CONTROSET system is designed to provide precise digital speed selection using hydraulic or mechanical variators and a standard a.c. servo motor. 

DFM105, Digital Tachometer, is a more versatile version of the original DFM100. The terminal connections are identical to the DFM100 & it is recommended as a direct replacement where a front panel keypad is not required. 

The DFM125 ECI tachometer is a modified version of the standard DFM125. It is fitted with a rear mounting adaptor which is designed to take the signal from the eddy current sensor. 

The FV25B Reversable Marine Tachometer uses magnetic or proximity sensors operating in conjuction with a toothed wheel or symmetrically spaced bolt heads, To produce a reverseing speed output. 

The MKP 125 is a low cost, plug-in keypad system which is suitable for programming many Control Ability products. Full Keypad programmer with software check & parameter reset. 

PDM125MR meter relays are four digit programmable panel meters which are fitted with control relays or analog output signals. 

The PFM120ES1 includes Hand Held Tachometer with sensor socket,IN Inductive plug in Sensor & Battery.