Speed & Position Controller, MSS8

MSS8 - Speed and Position Controller  

The MSS Servo Process Controllers are suitable for use in a wide range of industrial applications. They operate by comparing the demand signal set on the control panel with the value of a reply or feedback signal, which is obtained from the process being controlled. If two signals vary by more than a pre-set amount the controller will produce an output by energising a 'high' or a 'low' relay. The output may be used to drive a suitable actuator which in turn, will adjust the level of the process variable until the demand and feedback signals are equal.
With this type of control system, processes may be set to operate at desired values and be maintained there automatically.
The feedback transducer may be a variable resistor or any other device capable of producing a suitable electrical signal.

Applications include: Speed control via variable speed gearboxes, Valve position control, Automatic voltage control, Damper control, Out of limits detector, Positioning of hydraulic or pneumatic actuators, Control of temperature, pressure, level, speed, etc.

Internal trimming facilities are available as standard.


Features include:

1. Input Voltage or Current Scaling
2. Deadband Adjustment
3. Offset Control
4. Transducer Range Matching

The full range of features & specification’s are described on the data sheet.

Click here to download data sheet

Full manuals are provided with the instrument.

All prices exclude VAT & carriage.                                                                     

Customer Reviews: